User

Get user account related data from your prefrred exchanges. More than 100 exchanges supported.

Available exchanges _1btcxe acx allcoin anxpro bcex bequant bibox bigone binance binanceje bit2c bitbank bitbay bitfinex bitfinex2 bitflyer bitforex bithumb bitkk bitlish bitmarket bitmex bitso bitstamp bitstamp1 bittrex bitz bl3p bleutrade braziliex btcalpha btcbox btcchina btcexchange btcmarkets btctradeim btctradeua btcturk buda bxinth cex chbtc chilebit cobinhood coinbase coinbaseprime coinbasepro coincheck coinegg coinex coinexchange coinfalcon coinfloor coingi coinmarketcap coinmate coinnest coinone coinspot cointiger coolcoin coss crex24 crypton deribit dsx dx ethfinex exmo exx fcoin fcoinjp flowbtc foxbit fybse gateio gdax gemini hadax hitbtc hitbtc2 huobipro huobiru ice3x independentreserve indodax itbit kkex kraken kucoin kucoin2 kuna lakebtc lbank liqui liquid livecoin luno lykke mandala mercado mixcoins negociecoins nova oceanex okcoincny okcoinusd okex okex3 paymium poloniex rightbtc southxchange stronghold surbitcoin theocean therock tidebit tidex upbit vaultoro vbtc virwox xbtce yobit zaif zb

Module

libkloudtrader.crypto

Note: All of the User APIs in libkloudtrader.crypto have a test mode flag which lets you talk to your exchange's sandbox/test account. This means that you can place orders, etc in test mode with virtaul currency. But not all exchanges support test mode. Infact very few do. Also, in most of the cases you have to create a different account with your exchange for test/sandbox privileges thus you will have different API credentials for your test account. The exchanges that support test mode are:

List of exchanges in Test Mode bitmex coinbaseprime coinbasepro deribit gdax gemini kucoin kucoin2

Note: Not every exchange supports every API. But all of them support the major ones. You will receive {'message': '400 Bad Request: Functionality not available for this exchange.'} if your exchange doesn't support it.

Note: Returned data may differ from exchange to exchange

Balance

Get your account balance

user_balance(exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Example

import libkloudtrader.crypto as crypto 

crypto.user_balance()

{  
   'info':[  
      {  
         'id':'*****',
         'currency':'BTC',
         'balance':'0.0000000000000000',
         'available':'0',
         'hold':'0.0000000000000000',
         'profile_id':'*******'
      },
      .
      .
      .
      'free':{  
      'BTC':0.0,
      'USDC':0.0,
      'USD':112.0,
      'GBP':0.0,
      'EUR':0.0,
      'ETH':0.0,
      'BAT':0.0
   },
   'used':{  
      'BTC':0.0,
      'USDC':0.0,
      'USD':0.0,
      'GBP':0.0,
      'EUR':0.0,
      'ETH':0.0,
      'BAT':0.0
   },
   'total':{  
      'BTC':0.0,
      'USDC':0.0,
      'USD':112.0,
      'GBP':0.0,
      'EUR':0.0,
      'ETH':0.0,
      'BAT':0.0
   }
}

Ledger History

Get your latest ledger history

user_ledger(currency_code, exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
currency_code	required	Currency Code. E.g. BTC, USD, ETH, etc	str
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Example

import libkloudtrader.crypto as crypto 

crypto.user_ledger(currency_code="USD")

return type : json

[  
   {  
      'info':{  
         'transactID':'00000000-0000-0000-0000-000000000000',
         'account':****,
         'currency':'XBt',
         'transactType':'UnrealisedPNL',
         'amount':****,
         'fee':0,
         'transactStatus':'Pending',
         'address':'XBTUSD',
         'tx':'',
         'text':'',
         'transactTime':None,
         'walletBalance':****,
         'marginBalance':****,
         'timestamp':None
      },
      'id':'00000000-0000-0000-0000-000000000000',
      'direction':'out',
      'account':'****',
      'referenceId':'',
      'referenceAccount':None,
      'type':'UnrealisedPNL',
      'currency':'BTC',
      'amount':****,
      'before':****,
      'after':****,
      'status':'pending',
      'timestamp':None,
      'datetime':None,
      'fee':{  
         'cost':0.0,
         'currency':'BTC'
      }
   }
]

Trades

Get your latest trades.

user_trades(symbol, exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
symbol	required	The symbol you want your trades of(E.g BTC/USD, ETH/BTC)	str
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Closed Orders

Get all of your closed orders

user_closed_orders(symbol, exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
symbol	required	The symbol you want your closes orders of(E.g BTC/USD, ETH/BTC)	str
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Example

import libkloudtrader.crypto as crypto

crypto.user_closed_orders(symbol='BTC/USD')

return type : json

[  
   {  
      'id':'55d7e42e-3a6c-41f7-a692-9bdcd23dce70',
      'info':{  
         'id':'55d7e42e-3a6c-41f7-a692-9bdcd23dce70',
         'product_id':'BTC-USD',
         'side':'buy',
         'funds':'99.7008973000000000',
         'specified_funds':'100.0000000000000000',
         'type':'market',
         'post_only':False,
         'created_at':'2019-07-11T15:10:25.795687Z',
         'done_at':'2019-07-11T15:10:25.803Z',
         'done_reason':'filled',
         'fill_fees':'0.2991026897760000',
         'filled_size':'0.96413263',
         'executed_value':'99.7008965920000000',
         'status':'done',
         'settled':True
      },
      'timestamp':1562857825795,
      'datetime':'2019-07-11T15:10:25.795Z',
      'lastTradeTimestamp':None,
      'status':'closed',
      'symbol':'BTC/USD',
      'type':'market',
      'side':'buy',
      'price':None,
      'cost':99.700896592,
      'amount':99.7008973,
      'filled':0.96413263,
      'remaining':98.73676467,
      'fee':{  
         'cost':0.2991026898,
         'currency':'USD',
         'rate':None
      }
   },
   {  
      'id':'b5a605a6-70de-493a-a2b8-714d4be1d9f1',
      'info':{  
         'id':'b5a605a6-70de-493a-a2b8-714d4be1d9f1',
         'product_id':'BTC-USD',
         'side':'buy',
         'funds':'19.9401794600000000',
         'specified_funds':'20.0000000000000000',
         'type':'market',
         'post_only':False,
         'created_at':'2019-07-11T15:11:13.041405Z',
         'done_at':'2019-07-11T15:11:13.47Z',
         'done_reason':'filled',
         'fill_fees':'0.0598205371410000',
         'filled_size':'0.19282670',
         'executed_value':'19.9401790470000000',
         'status':'done',
         'settled':True
      },
      'timestamp':1562857873041,
      'datetime':'2019-07-11T15:11:13.041Z',
      'lastTradeTimestamp':None,
      'status':'closed',
      'symbol':'BTC/USD',
      'type':'market',
      'side':'buy',
      'price':None,
      'cost':19.940179047,
      'amount':19.94017946,
      'filled':0.1928267,
      'remaining':19.74735276,
      'fee':{  
         'cost':0.0598205371,
         'currency':'USD',
         'rate':None
      }
   }
]

Individual Order

Get info about an individual order

get_order(order_id, symbol, exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
order_id	required	Id of the order you want info about	str
symbol	required	The symbol you want your closes orders of(E.g BTC/USD, ETH/BTC)	str
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Example

import libkloudtrader.crypto as crypto 

crypto.get_order(order_id="55d7e42e-3a6c-41f7-a692-9bdcd23dce70",symbol='BTC/USD')

return type : json

{  
   'id':'55d7e42e-3a6c-41f7-a692-9bdcd23dce70',
   'info':{  
      'id':'55d7e42e-3a6c-41f7-a692-9bdcd23dce70',
      'product_id':'BTC-USD',
      'side':'buy',
      'funds':'99.7008973000000000',
      'specified_funds':'100.0000000000000000',
      'type':'market',
      'post_only':False,
      'created_at':'2019-07-11T15:10:25.795687Z',
      'done_at':'2019-07-11T15:10:25.803Z',
      'done_reason':'filled',
      'fill_fees':'0.2991026897760000',
      'filled_size':'0.96413263',
      'executed_value':'99.7008965920000000',
      'status':'done',
      'settled':True
   },
   'timestamp':1562857825795,
   'datetime':'2019-07-11T15:10:25.795Z',
   'lastTradeTimestamp':None,
   'status':'closed',
   'symbol':'BTC/USD',
   'type':'market',
   'side':'buy',
   'price':None,
   'cost':99.700896592,
   'amount':99.7008973,
   'filled':0.96413263,
   'remaining':98.73676467,
   'fee':{  
      'cost':0.2991026898,
      'currency':'USD',
      'rate':None
   }
}

All orders

Get info about all of your orders wether they are closed, half filled or even rejected.

user_orders(symbol, exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
symbol	required	The symbol you want your closes orders of(E.g BTC/USD, ETH/BTC)	str
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Example

import libkloudtrader.crypto as crypto 

crypto.user_orders(symbol="BTC/USD")

return type : json

[  
   {  
      'id':'55d7e42e-3a6c-41f7-a692-9bdcd23dce70',
      'info':{  
         'id':'55d7e42e-3a6c-41f7-a692-9bdcd23dce70',
         'product_id':'BTC-USD',
         'side':'buy',
         'funds':'99.7008973000000000',
         'specified_funds':'100.0000000000000000',
         'type':'market',
         'post_only':False,
         'created_at':'2019-07-11T15:10:25.795687Z',
         'done_at':'2019-07-11T15:10:25.803Z',
         'done_reason':'filled',
         'fill_fees':'0.2991026897760000',
         'filled_size':'0.96413263',
         'executed_value':'99.7008965920000000',
         'status':'done',
         'settled':True
      },
      'timestamp':1562857825795,
      'datetime':'2019-07-11T15:10:25.795Z',
      'lastTradeTimestamp':None,
      'status':'closed',
      'symbol':'BTC/USD',
      'type':'market',
      'side':'buy',
      'price':None,
      'cost':99.700896592,
      'amount':99.7008973,
      'filled':0.96413263,
      'remaining':98.73676467,
      'fee':{  
         'cost':0.2991026898,
         'currency':'USD',
         'rate':None
      }
   },
   {  
      'id':'b5a605a6-70de-493a-a2b8-714d4be1d9f1',
      'info':{  
         'id':'b5a605a6-70de-493a-a2b8-714d4be1d9f1',
         'product_id':'BTC-USD',
         'side':'buy',
         'funds':'19.9401794600000000',
         'specified_funds':'20.0000000000000000',
         'type':'market',
         'post_only':False,
         'created_at':'2019-07-11T15:11:13.041405Z',
         'done_at':'2019-07-11T15:11:13.47Z',
         'done_reason':'filled',
         'fill_fees':'0.0598205371410000',
         'filled_size':'0.19282670',
         'executed_value':'19.9401790470000000',
         'status':'done',
         'settled':True
      },
      'timestamp':1562857873041,
      'datetime':'2019-07-11T15:11:13.041Z',
      'lastTradeTimestamp':None,
      'status':'closed',
      'symbol':'BTC/USD',
      'type':'market',
      'side':'buy',
      'price':None,
      'cost':19.940179047,
      'amount':19.94017946,
      'filled':0.1928267,
      'remaining':19.74735276,
      'fee':{  
         'cost':0.0598205371,
         'currency':'USD',
         'rate':None
      }
   }
]

Positions

Get your positions. Many exchanges don't support this functionality via their APIs.

user_positions(exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Example

import libkloudtrade.crypto as crypto

crypto.user_positions()

return type : json

[  
   {  
      'account':****,
      'symbol':'ETHUSD',
      'currency':'XBt',
      'underlying':'ETH',
      'quoteCurrency':'USD',
      'commission':0.00075,
      'initMarginReq':0.02,
      'maintMarginReq':0.01,
      'riskLimit':5000000000,
      'leverage':50,
      'crossMargin':True,
      'deleveragePercentile':1,
      'rebalancedPnl':3186,
      'prevRealisedPnl':0,
      'prevUnrealisedPnl':0,
      'prevClosePrice':274.38,
      'openingTimestamp':'2019-07-11T18:00:00.000Z',
      'openingQty':-1,
      'openingCost':-29710,
      'openingComm':-96,
      'openOrderBuyQty':0,
      'openOrderBuyCost':0,
      'openOrderBuyPremium':0,
      'openOrderSellQty':0,
      'openOrderSellCost':0,
      'openOrderSellPremium':0,
      'execBuyQty':0,
      'execBuyCost':0,
      'execSellQty':0,
      'execSellCost':0,
      'execQty':0,
      'execCost':0,
      'execComm':0,
      'currentTimestamp':'2019-07-11T18:05:46.007Z',
      'currentQty':-1,
      'currentCost':-29710,
      'currentComm':-96,
      'realisedCost':0,
      'unrealisedCost':-29710,
      'grossOpenCost':0,
      'grossOpenPremium':0,
      'grossExecCost':0,
      'isOpen':True,
      'markPrice':274.2,
      'markValue':-27420,
      'riskValue':27420,
      'homeNotional':-0.0116767865,
      'foreignNotional':3.2017748716,
      'posState':'',
      'posCost':-29710,
      'posCost2':-29176,
      'posCross':534,
      'posInit':595,
      'posComm':24,
      'posLoss':534,
      'posMargin':619,
      'posMaint':322,
      'posAllowance':0,
      'taxableMargin':0,
      'initMargin':0,
      'maintMargin':2909,
      'sessionMargin':0,
      'targetExcessMargin':0,
      'varMargin':0,
      'realisedGrossPnl':0,
      'realisedTax':0,
      'realisedPnl':96,
      'unrealisedGrossPnl':2290,
      'longBankrupt':0,
      'shortBankrupt':0,
      'taxBase':2290,
      'indicativeTaxRate':0,
      'indicativeTax':0,
      'unrealisedTax':0,
      'unrealisedPnl':2290,
      'unrealisedPnlPcnt':0.0771,
      'unrealisedRoePcnt':3.8539,
      'simpleQty':None,
      'simpleCost':None,
      'simpleValue':None,
      'simplePnl':None,
      'simplePnlPcnt':None,
      'avgCostPrice':297.1,
      'avgEntryPrice':297.1,
      'breakEvenPrice':329.9,
      'marginCallPrice':10361.65,
      'liquidationPrice':10361.65,
      'bankruptPrice':10364.65,
      'timestamp':'2019-07-11T18:05:46.007Z',
      'lastPrice':274.2,
      'lastValue':-27420
   },
   {  
      'account':****,
      'symbol':'XBTUSD',
      'currency':'XBt',
      'underlying':'XBT',
      'quoteCurrency':'USD',
      'commission':0.00075,
      'initMarginReq':0.01,
      'maintMarginReq':0.005,
      'riskLimit':20000000000,
      'leverage':100,
      'crossMargin':True,
      'deleveragePercentile':1,
      'rebalancedPnl':0,
      'prevRealisedPnl':0,
      'prevUnrealisedPnl':0,
      'prevClosePrice':11727.31,
      'openingTimestamp':'2019-07-11T18:00:00.000Z',
      'openingQty':1,
      'openingCost':-8435,
      'openingComm':6,
      'openOrderBuyQty':0,
      'openOrderBuyCost':0,
      'openOrderBuyPremium':0,
      'openOrderSellQty':0,
      'openOrderSellCost':0,
      'openOrderSellPremium':0,
      'execBuyQty':0,
      'execBuyCost':0,
      'execSellQty':0,
      'execSellCost':0,
      'execQty':0,
      'execCost':0,
      'execComm':0,
      'currentTimestamp':'2019-07-11T18:05:46.007Z',
      'currentQty':1,
      'currentCost':-8435,
      'currentComm':6,
      'realisedCost':0,
      'unrealisedCost':-8435,
      'grossOpenCost':0,
      'grossOpenPremium':0,
      'grossExecCost':0,
      'isOpen':True,
      'markPrice':11688.93,
      'markValue':-8555,
      'riskValue':8555,
      'homeNotional':8.555e-05,
      'foreignNotional':-1,
      'posState':'',
      'posCost':-8435,
      'posCost2':-8435,
      'posCross':120,
      'posInit':85,
      'posComm':7,
      'posLoss':0,
      'posMargin':212,
      'posMaint':81,
      'posAllowance':0,
      'taxableMargin':0,
      'initMargin':0,
      'maintMargin':92,
      'sessionMargin':0,
      'targetExcessMargin':0,
      'varMargin':0,
      'realisedGrossPnl':0,
      'realisedTax':0,
      'realisedPnl':-6,
      'unrealisedGrossPnl':-120,
      'longBankrupt':0,
      'shortBankrupt':0,
      'taxBase':0,
      'indicativeTaxRate':0,
      'indicativeTax':0,
      'unrealisedTax':0,
      'unrealisedPnl':-120,
      'unrealisedPnlPcnt':-0.0142,
      'unrealisedRoePcnt':-1.4226,
      'simpleQty':None,
      'simpleCost':None,
      'simpleValue':None,
      'simplePnl':None,
      'simplePnlPcnt':None,
      'avgCostPrice':11855.5,
      'avgEntryPrice':11855.5,
      'breakEvenPrice':11864,
      'marginCallPrice':99,
      'liquidationPrice':99,
      'bankruptPrice':99,
      'timestamp':'2019-07-11T18:05:46.007Z',
      'lastPrice':11688.93,
      'lastValue':-8555
   }
]

User Transactions

Get all of your latest transactions

user_transactions(currency_code, exchange, api_key, api_secret, exchange_password, exchange_uid, test_mode)

Paramters	Required/Optional	Description	Type
currency_code	required	Currency Code. E.g. BTC, USD, ETH, etc	str
exchange	required as environment variable	The exchange you want to trade on. Will automatically be present when you deploy to Narwhal after you link your favored exchange	str
api_key	required as environment variable	Your API Key. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
api_secret	required as environment variable	Your API Secret. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_password	optional/set as environment variable	Your password or any special passphrase provided by your exchange(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
exchange_uid	optional/set as environment variable	A unique Id provided by your exchange for trading(if needed). Not all exchanges need this, thus it is optional. Will automatically be present when you deploy to Narwhal after linking your exchange.	str
test_mode	optional	True if you want to want the API to be executed in test/sandbox mode. False by default.	bool

Example

import libkloudtrader.crypto as crypto 

crypto.user_transactions('USD')

[  
   {  
      'info':{  
         'id':'*******',
         'type':'deposit',
         'created_at':'2019-07-11 10:20:27.876097+00',
         'completed_at':'2019-07-11 10:20:27.882044+00',
         'canceled_at':None,
         'processed_at':'2019-07-11 10:20:27.882044+00',
         'user_nonce':None,
         'amount':'*******',
         'details':{  
            'coinbase_account_id':'*******',
            'coinbase_transaction_id':'*******'
         },
         'currency':'USD'
      },
      'id':'*******',
      'txid':None,
      'timestamp':1562840427876,
      'datetime':'2019-07-11T10:20:27.876Z',
      'address':None,
      'tag':None,
      'type':'deposit',
      'amount':*******,
      'currency':'USD',
      'status':'ok',
      'updated':1562840427882,
      'fee':None
   },
   {  
      'info':{  
         'id':'*******',
         'type':'deposit',
         'created_at':'2019-07-11 10:22:21.470484+00',
         'completed_at':'2019-07-11 10:22:21.477402+00',
         'canceled_at':None,
         'processed_at':'2019-07-11 10:22:21.477402+00',
         'user_nonce':None,
         'amount':'*******',
         'details':{  
            'coinbase_account_id':'*******',
            'coinbase_transaction_id':'*******'
         },
         'currency':'USD'
      },
      'id':'*******',
      'txid':None,
      'timestamp':1562840541470,
      'datetime':'2019-07-11T10:22:21.470Z',
      'address':None,
      'tag':None,
      'type':'deposit',
      'amount':****,
      'currency':'USD',
      'status':'ok',
      'updated':1562840541477,
      'fee':None
   }
]